We print what you actually need.
PrintMe3D is a small Belgrade print shop with big machines. We started it because getting a simple printed part took too long and cost too much — and because we believe you should know the price before you ask.
Our story
Clear price, human review, fast turnaround.
Anyone who has ever ordered a 3D print knows the drill: send a file, wait a day or two for a quote, then find out the part is too expensive or can’t be printed at all. We flipped that.
On our site you see the price immediately. Within 2–5 hours a person reviews your model and confirms it — or tells you what to change to make the part stronger, cheaper or easier to print. Only once you agree do we start.
We run two Creality K2 Plus Combo printers at two Belgrade locations, so one is always close to you, and two machines in parallel mean even a 50-piece batch doesn’t wait for weeks.
2
Creality K2 Plus Combo printers running in parallel
350 mm
maximum part size — 350 × 350 × 350 mm in one piece
4
colours in a single print, no painting
600 mm/s
maximum print speed
2–5 h
to a confirmed quote during work hours
Process
From file to parcel.
-
01instantly
Upload your model
Drop an STL, 3MF or OBJ file into the calculator and instantly see mass, dimensions and an estimated price. No model? Send a sketch or a photo.
-
022–5 h
We confirm the quote
A person, not software, checks every file: wall thickness, orientation and supports. You get the final price and an exact date.
-
031–4 days
We print and inspect
A camera watches the first layer and we measure the finished part with calipers. Basic support removal is always included.
-
041–2 days
Pick up or ship
Collect at Mrakovička 25 or Dragiše Lapčevića 7, or we ship by courier anywhere in Serbia.
Quality control
Three checks for every part.
- 01
Before printing
We check the mesh is watertight, wall thickness and units. We orient for load and keep supports off visible surfaces.
- 02
During printing
A camera watches the first layer and AI detection stops the print if anything detaches or tangles. Filament stays dry in the sealed CFS system.
- 03
After printing
We remove supports, measure key dimensions with calipers and inspect the surface. Only then do we pack the part.
Equipment
Creality K2 Plus Combo
| Build volume | 350 × 350 × 350 mm |
|---|---|
| Max speed | 600 mm/s |
| Acceleration | 30 000 mm/s² |
| Nozzle | hardened, up to 350 °C |
| Chamber | actively heated, up to 60 °C |
| Multi-colour | CFS, 4 colours |
| Monitoring | AI cameras for first layer and failures |
| Machines | 2, running in parallel |
Locations
Two addresses, same quality.
We print and hand over orders at both locations on weekdays from 8am to 5pm. When ordering, choose where you want to collect.
Got a model? See the price in 30 seconds.
No sign-up, no waiting for a quote. No file? Send a sketch — we model that too.